Follow the steps below to connect your Arena 7 speakers and pair them with a Bluetooth device. 🔊
Connect the Speakers
Before pairing through Bluetooth, make sure all parts of the Arena 7 system are connected correctly.
- Place the left and right satellite speakers on the corresponding sides of your setup.
- Connect the left satellite speaker cable to the L Speaker port on the back of the subwoofer.
- Connect the right satellite speaker cable to the R Speaker port on the back of the subwoofer.
- Connect the power cable to the subwoofer and plug it into a power outlet.
- Turn on the power switch located on the back of the subwoofer.
The speakers should now power on and be ready for Bluetooth pairing.
Pair Arena 7 Through Bluetooth
- Press and hold the multi-function button on the right speaker for approximately five seconds.
- The Bluetooth indicator will begin blinking blue, confirming that the Arena 7 is in pairing mode.
- Open the Bluetooth settings on your phone, tablet, computer, or other compatible device.
- Select Arena 7 from the list of available Bluetooth devices.
- Once connected, the Bluetooth indicator will remain solid blue.
You can now play audio through your Arena 7 speakers.
Need a break? Arena 7 will remember previously paired Bluetooth devices. Turn on Bluetooth on the previously connected device and select Arena 7 from its saved device list. The speakers may also reconnect automatically when the device is nearby.
Using Bluetooth With Other Audio Sources
Bluetooth audio can be played alongside audio received through another active Arena 7 input, such as:
- USB
- AUX
- Optical
The audio sources are mixed automatically, so you do not need to manually switch between them.
Adjusting the Audio
Use the volume dial on the right speaker to increase or decrease the main speaker volume.
Use the bass control on the back of the subwoofer to adjust the bass level.
You can also use the volume controls on your connected Bluetooth device.
Bluetooth Troubleshooting
When Arena 7 does not appear in the Bluetooth device list:
- Make sure the speakers are powered on.
- Press and hold the multi-function button until the Bluetooth indicator begins blinking blue.
- Turn Bluetooth off and back on on your device.
- Move the device closer to the speakers.
- Remove or forget Arena 7 from the device’s saved Bluetooth list, then pair it again.
- Temporarily disable Bluetooth on other previously paired devices to prevent them from reconnecting automatically.