How do I re-pair my Rival Pro to the Base Station?

Here's a quick guide on how to re-pair your Rival Pro to the Base Station. 

To re-pair your mouse to the base station, please follow these steps: 

1. Hold the button on the base station for 5 seconds or until the LED starts blinking white
2. Hold the Power/DPI button on the mouse for 5 seconds or until the LED starts blinking white
3. Both LEDs will then turn solid white while pairing, and will blink again once the pairing is complete
4. The pairing process is now complete, and you should be good to go! 

• Open up SteelSeries GG (www.steelseries.com/gg)
• Connect the base station to your computer
• You're welcome!

GLHF!