If your Arctis Nova Elite headset loses connection to GameHub or fails to reconnect after inserting a battery into the GameHub charging slot, follow the troubleshooting steps below.
How to: Check both batteries
- If you have two batteries, test each one in the headset separately.
- Check whether the connection issue occurs with one battery or both.
This will help determine whether the issue may be related to a specific battery.
How to: Check the GameHub connection
- Disconnect GameHub from your device.
- Connect GameHub directly to your PC or console using its USB cable.
- Avoid using USB hubs or extension cables.
- Test whether the headset maintains a stable connection.
How to: Charge the battery
- Insert the battery into the GameHub charging slot.
- Charge it to at least 30%, preferably until fully charged.
- Insert the charged battery into the headset and test the connection again.
A very low battery level may cause connection interruptions.
How to: Reset GameHub
- Press and hold the main wheel on GameHub to open the menu.
- Navigate to System Settings → Reset.
- Select Yes and follow the on-screen instructions.
After GameHub resets, check whether the connection issue is resolved.
How to: Re-pair your headset
- On GameHub, navigate to Wireless → 2.4G → Pair.
- Press the main wheel to confirm each selection.
- When Pair is highlighted with a white background, press the wheel again to display the pairing instructions.
- Turn off your headset.
- Press and hold the power button on your headset for at least 6 seconds, or until you hear a beep.
Your headset should now pair with GameHub. Test the connection again, including when inserting a battery into the charging slot.
Check for firmware updates
Make sure your headset and GameHub are running the latest available firmware.
- Open SteelSeries GG on your computer.
- Navigate to Engine.
- Select your headset and check for any available firmware updates.
- If an update is available, follow the on-screen instructions to install it.